Follow Us on LinkedIn Follow Us on YouTube

  1. CLR 1020 / CLH 6021

    Semi-flexible epoxy adhesive and casting system. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1020 / CLH 6021

  2. CLR 1026 / CLH 6021

    Low viscosity, semi-flexible. An unfilled, semi-flexible two component epoxy system. Its low mixed viscosity makes it suitable for potting and encapsulating electronic components. CLR 1026 / CLH 6021

  3. CLR 1180 / CLH 6520

    Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520

  4. CLR 1205 / CLH 6770

    Clear low viscosity semi-flexible adhesive / sealant. A low viscosity, two component unfilled, room temperature cure epoxy system. CLR 1205 / CLH 6770

  5. CLR 1710 / CLH 6710

    Abrasion Resistant Epoxy. An abrasion resistant, two component epoxy surface coat. CLR 1710 / CLH 6710

  6. CLR 1946 / CLH 6500

    Product is recommended for potting and encapsulating applications. A two component, room temperature cure semi-flexible epoxy system. The system was developed for potting / casting of electrical and electronic components. Its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment. CLR 1946 / CLH 6500

  7. XPD 1401 / CLI 4182

    Density = 0.80. A low viscosity, low density, user-friendly, room temperature cure, MDI based polyurethane system. The product cures to a hardness of 60 shore A, and has a cured density of 0.80 gms/cm3. XPD 1401 / CLI 4182

  8. XRD 1018 / XHD 1019

    1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019

  9. XRD 1575 / XH 61418

    2:1 machine dispense adhesive. Bonding abrasive wheels and disks. A two component epoxy system suitable for potting, casting and adhesive applications. Product gels quickly and has good thermal cycling endurance. Material is filled with non-abrasive fillers making it suitable for machine dispensing. XRD 1575 / XH6 1418

Results 1 - 9 of 9

Filters